自動攪拌一體機置罐體可選材質！_ 行業動態_新聞資訊_自動攪拌一體車_自動攪拌一體機

站內搜索

新聞資訊

公司新聞行業動態

熱點

自動上料平口攪拌機多種方量可供選擇

2022-12-23

混凝土自動上料攪拌車的功能有哪些？

2022-12-19

混凝土自動拌料車移動式可自行走戶外施工

2022-12-16

自上料攪拌車企業這么多，買車的時候應該看哪方面？

2022-12-12

關于山汽

聯系人：劉老師

電話：400-879-1999

公司：山東山汽工程機械（集團）有限公司

地址：山東省萊州市206國道與308省道交叉口東南50米

自動攪拌一體機置罐體可選材質！

所屬分類：行業動態發布時間：2021-04-02 來源：http://www.sooezi.com/ 瀏覽量：0

選裝配置自動攪拌一體機主要包括取力器、攪拌筒前后支架、進口減速機、液壓系統、攪拌筒、操縱機構、清洗系統等。自動攪拌一體機工作原理是：通過取力裝置將汽車底盤的動力取出，并驅動液壓系統的變量泵，把機械能轉化為液壓能傳給定量馬達，馬達再驅動減速機，由減速機驅動攪拌裝置，對混凝土進行攪拌。

The optional automatic mixing machine mainly includes power take-off, front and rear supports of mixing drum, imported reducer, hydraulic system, mixing drum, operating mechanism, cleaning system, etc. The working principle of the automatic mixing machine is: take out the power of the car chassis through the power take-off device, drive the variable displacement pump of the hydraulic system, convert the mechanical energy into hydraulic energy and transfer it to the quantitative motor, the motor drives the reducer, and the reducer drives the mixing device to mix the concrete.

可選裝實現功能自動攪拌一體機是多年的機械設計、制造、焊接經驗為依據，在充分消化、吸收國內外自動上料攪拌車制造商制造技術的基礎上，經過上百次進出料速度、出料率、攪拌效率、扭曲彈性、行駛性能等試驗合格后制造出的一款新產品，是商品混凝土運輸的理想設備。

Optional automatic mixing machine is a new product which is based on years of mechanical design, manufacturing and welding experience, fully digesting and absorbing the advanced manufacturing technology of domestic and foreign automatic feeding mixing truck manufacturers, and passing hundreds of tests on feeding and discharging speed, discharging rate, mixing efficiency, twisting elasticity and driving performance. It is a commercial coagulation machine It is an ideal equipment for soil transportation.

自動攪拌一體機系統說明攪拌筒：該車型所采用的攪拌筒形式是一種應用較為普遍的結構形式，攪拌筒采用梨形結構，其清洗用水和運輸過程中視需要補充加入的拌合水，均由攪拌筒頭部進料口處注入筒內。

Automatic mixing machine system description mixing drum: the mixing drum used in this model is a common structure. The mixing drum adopts pear shaped structure, and its cleaning water and mixing water added as needed during transportation are injected into the drum from the feeding port of the mixing drum head.

傳動系統：該攪拌筒的驅動方式為以發動機為動力源，由發動機后端的取力器取力，通過傳動軸傳遞到變量柱塞液壓泵，經定量柱塞油馬達，再通過減速機帶動攪拌筒轉動。

Transmission system: the mixing drum is driven by the engine as the power source, and the power is taken by the power take-off at the rear end of the engine, which is transmitted to the variable plunger hydraulic pump through the transmission shaft, and then driven by the quantitative plunger oil motor and the reducer to rotate the mixing drum.

攪拌筒的進出料系統（裝料和卸料機構）：是輔助攪拌筒工作的重要裝置。

The feeding and discharging system (loading and unloading mechanism) of the mixing drum is an important device to assist the mixing drum.

操縱系統：是整個自動上料攪拌車的控制部件，操縱面板上開有“工字形”槽，是操縱桿的活動空間；并且后半部的槽上開有限位孔，用來固定操縱桿的位置。該操縱系統通過汽車尾部的左右兩個操縱桿來控制攪拌筒的正、反轉和轉速，從而來完成進出料以及攪拌動作。

Control system: it is the control part of the whole automatic feeding mixer. There is an I-shaped slot on the control panel, which is the activity space of the control lever. And there is a limit hole on the slot in the back half, which is used to fix the position of the control lever. The control system controls the forward, reverse and rotational speed of the mixing drum through the left and right control levers at the rear of the car, so as to complete the feeding and discharging and mixing action.

供水系統：自動攪拌一體機的供水系統主要用來清洗攪拌裝置。該車型的供水系統共有兩種型式，一種是離心水泵供水系統；一種是壓力水箱供水系統。

Water supply system: the water supply system of automatic mixing machine is mainly used to clean the mixing device. There are two types of water supply system, one is centrifugal pump water supply system, the other is pressure tank water supply system.

上一頁：離合器如何保證攪拌車能平穩啟動下一頁：了解自動攪拌機突發過熱現象怎么處理？

熱門產品 / HOT PRODUCT