攪拌設備在工作中產生的流動作用有哪些？_公司新聞_新聞資訊_自動攪拌一體車_自動攪拌一體機

站內搜索

新聞資訊

公司新聞行業動態

熱點

自動上料平口攪拌機多種方量可供選擇

2022-12-23

混凝土自動上料攪拌車的功能有哪些？

2022-12-19

混凝土自動拌料車移動式可自行走戶外施工

2022-12-16

自上料攪拌車企業這么多，買車的時候應該看哪方面？

2022-12-12

關于山汽

聯系人：劉老師

電話：400-879-1999

公司：山東山汽工程機械（集團）有限公司

地址：山東省萊州市206國道與308省道交叉口東南50米

攪拌設備在工作中產生的流動作用有哪些？

所屬分類：公司新聞發布時間：2021-07-29 來源：http://www.sooezi.com/ 瀏覽量：0

自動攪拌一體機設備在一定功率及槳葉情勢情況下，槳葉排液量以及壓頭可能通過轉變槳葉的直徑跟轉速的匹配來調節，即大直徑槳葉配以低轉速的攪拌設備產生較高的流動作用跟較低的壓頭，而小直徑槳葉配以高轉速則產生較高的壓頭跟較低的流動作用。在攪拌槽中，要使微團彼此碰撞，的辦法是供給足夠的剪切速率。

Under the condition of certain power and blade situation, the discharge volume and pressure head of the blade of the automatic mixing all-in-one machine may be adjusted by changing the matching between the diameter of the blade and the rotating speed, that is, the mixing equipment with low rotating speed for large-diameter blade will produce higher flow effect and lower pressure head, while the mixing equipment with high rotating speed for small-diameter blade will produce higher pressure head and lower flow effect. In the stirred tank, the best way to make the pellets collide with each other is to supply sufficient shear rate.

從自動攪拌一體機來看，恰是因為流體速度差的存在，才使流體各層之間彼此混淆，因此，凡攪拌進程老是波及到流體剪切速率。剪切應力是一種力，是攪拌利用中氣泡疏散跟液滴破碎等的真正起因。

From the perspective of the automatic mixing machine, it is precisely because of the existence of fluid velocity difference that the fluid layers are confused with each other. Therefore, the mixing process always affects the fluid shear rate. Shear stress is a kind of stress, which is the real cause of bubble evacuation and droplet breakage in stirring.

就槳葉區而言，無論何種漿型，當槳葉直徑一定時，大剪切速率跟均勻剪切速率都隨轉速的進步而增加。但當轉速一定時，大剪切速率跟均勻剪切速率與槳葉直徑的關聯與漿型有關。當轉速一定時，徑向型槳葉大剪切速率隨槳葉直徑的增加而增加，而均勻剪切速率與槳葉直徑大小無關。

For the blade area, no matter what type of propeller, when the blade diameter is constant, the large shear rate and uniform shear rate increase with the progress of rotating speed. However, when the rotating speed is constant, the correlation between large shear rate and uniform shear rate and blade diameter is related to the pulp type. When the rotating speed is constant, the large shear rate of radial blade increases with the increase of blade diameter, while the uniform shear rate is independent of blade diameter.

這些有關槳葉區剪切速率的概念，在攪拌設備縮小及放大設計中須要特別小心。因小槽與大槽比較，小槽攪拌設備往往存在高轉速、小槳葉直徑及低葉尖速度等特點，而大槽攪拌設備往往存在低轉速大槳葉直徑及高葉尖速度等特點。

These concepts about the shear rate in the blade area need special care in the reduction and amplification design of mixing equipment. Due to the comparison between small tank and large tank, small tank mixing equipment often has the characteristics of high speed, small blade diameter and low blade tip speed, while large tank mixing equipment often has the characteristics of low speed, large blade diameter and high blade tip speed.

上一頁：自動攪拌一體機高質量發展的方向總結下一頁：全自動攪拌一體車結構組成情況

熱門產品 / HOT PRODUCT