自動攪拌一體車制動系統的重要性,踩剎車時的振動大多發生在舊車身上,由于磨損,攪拌車制動盤的表面光潔度在一定程度上不對齊,因此建議根據情況選擇采用車床光盤技術研磨,或更換制動墊(用于舊混凝土攪拌機)。
The importance of the brake system of the automatic mixer truck, the vibration when stepping on the brake mostly occurs on the old truck. Due to wear, the surface finish of the brake disc of the mixer truck is not aligned to a certain extent. Therefore, it is recommended to use the lathe disc technology to grind or replace the brake pad (used for the old concrete mixer) according to the situation.
當自動攪拌一體車的制動裝置即將停止時,方向盤總是偏轉到一側。事實上,這種情況通常被稱為"偏置制動"。造成故障的主要原因是小型混凝土攪拌機制動系統的左右泵之間的力不均勻。在驅動過程中,由于攪拌車制動盤的快速轉動速度,泵的不均勻作用與快速摩擦之間的差別很小,我們很難感覺到它。
When the braking device of the truck is about to stop, the steering wheel always deflects to one side. In fact, this situation is often referred to as "offset braking.". The main cause of the failure is the uneven force between the left and right pumps of the braking system of the small concrete mixer. In the driving process, due to the rapid rotation speed of the mixer brake disc, the difference between the uneven action of the pump and the rapid friction is very small, so it is difficult to feel it.
熱車需要十多分鐘才能啟動小型混合器。自動攪拌一體車的制動系統由發動機提供壓力推動卡鉗以夾緊制動盤(盤式制動器),或將制動盤推到與制動鼓(鼓式制動器)的摩擦處。因此,就像在上述情況下,可能是提供壓力的輸油管道沒有壓力,導致無法及時提供制動力。在這種情況下,應檢查制動主泵的真空動力皮管和小型混凝土攪拌機發動機的脫落是否開裂或松動。
It takes more than ten minutes for the hot car to start the small mixer. In the brake system of the all-in-one truck, the engine provides pressure to push the calipers to clamp the brake disc (disc brake), or push the brake disc to the friction with the brake drum (drum brake). Therefore, as in the above case, it may be that there is no pressure in the oil pipeline providing the pressure, resulting in the failure to provide the braking force in time. In this case, the vacuum power hose of the main brake pump and the engine of the small concrete mixer should be checked for cracking or loosening.
自動攪拌一體車不回位,踩剎車踏板,踏板不上升,無阻力,這種現象是制動器不回位,需要判斷制動液是否丟失,制動泵、管路和接頭是否漏油,主泵和泵部件是否損壞。
This phenomenon is that the brake does not return. It is necessary to judge whether the brake fluid is lost, whether the brake pump, pipeline and connector are leaking, and whether the main pump and pump components are damaged.